Thermophilic biological fluidized bed reactor in sludge line reduces greenhouse gas emissions in wastewater treatment system.

Greenhouse gas (GHG) emissions represent one of the main drawbacks of wastewater (WW) treatment. However, results of a detailed estimation of the emissions can be a valid tool to define optimal solutions for minimizing impact of WW treatment system on the environment. Thermophilic biological fluidized bed reactor (TBFBR) has been recently proposed as an alternative solution for biological sludge minimization in wastewater treatment plant (WWTPs). In this work, 5 diverse scenarios of sludge line composition were studied and combined with 5 diverse sludge disposal options. GHG emissions in 25 combinations were fully investigated to define optimal sludge treatment and disposal option. Results suggested that TBFBR help to reduce net emitted GHGs with respect to scenario with conventional stabilization treatment in sludge line (anaerobic digestion) (-32.3 ± 3.55 %) thanks to (i) the reuse in water line of the aqueous residue of TBFBR as alternative carbon source, (ii) the significant minimization of sludge production, and (iii) the contained impact of gross GHG emissions due to the energy consumption of this process. The strong minimization of sludge also led to a decisive reduction in GHG emissions in the subsequent phases of transport, additional treatments, and final disposal making the choice of the disposal option indifferent on the overall GHG emission estimation. Moreover, the coupling of processes for the simultaneous and preventive maximization of energy recovery (TCH, and AnaD) before sludge minimization in TBFBR determined a limited reduction of GHG emission compared to scenario with TBFBR alone (-3.71 ± 1.47 %).

Resistance to Somatostatin Analogs in Italian Acromegaly Patients: The MISS Study.

Approximately 60% of acromegaly patients are not adequately controlled by first-generation somatostatin receptor ligands. This multicenter retrospective study aimed to identify the most relevant biomarkers specific for the Italian acromegaly population. Resistant patients were enrolled consecutively based on time of neurosurgery, while responders were collected in a 1:2 ratio. Clinical characteristics and T2-intensity on MRI scans at diagnosis were retrospectively re-evaluated. Histological analyses of CAM5.2 granulation patterns and SSTR2 expression were centrally performed. Sixty-three resistant patients and thirty-three responders were enrolled. A low-grade SSTR2 expression was the most relevant predictor of resistance identified (OR 4.58, p = 0.013), even considering CAM5.2 immunohistochemistry (OR 2.65, p = 0.047). T2-iso/hyperintense pattern on MRI was also associated with a 3.3-fold greater probability of poor response to medical treatment (p = 0.027), as well as a young age at diagnosis (OR 0.96, p = 0.035). In those patients treated only after neurosurgery due to persistent GH-hypersecretion (51, 53.1%) the absence of any appreciable adenomatous remnant on postoperative MRI was associated with a negligible risk of resistance (OR 0.04, p = 0.003). In the Italian acromegaly population, a low-grade SSTR2 expression seems to be the most relevant predictor of resistance to first-generation somatostatin receptor ligands, followed by a SG/intermediate cytokeratin pattern and a T2-iso/hyperintense MRI signal.

How to Produce an Alternative Carbon Source for Denitrification by Treating and Drastically Reducing Biological Sewage Sludge.

Minimizing the biological sewage sludge (BSS) produced by wastewater treatment plants (WWTPs) represents an increasingly difficult challenge. With this goal, tests on a semi-full scale Thermophilic Alternate Membrane Biological Reactor (ThAlMBR) were carried out for 12 months. ThAlMBR was applied both on thickened (TBSS) and digested biological sewage sludge (DBSS) with alternating aeration conditions, and emerged: (i) high COD removal yields (up to 90%), (ii) a low specific sludge production (0.02-0.05 kgVS produced/kgCODremoved), (iii) the possibility of recovery the aqueous carbon residue (permeate) in denitrification processes, replacing purchased external carbon sources. Based on the respirometric tests, an excellent biological treatability of the permeate by the mesophilic biomass was observed and the denitrification kinetics reached with the diluted permeate ((4.0 mgN-NO3-/(gVSS h)) were found comparable to those of methanol (4.4 mgN-NO3-/(gVSS h)). Moreover, thanks to the similar results obtained on TBSS and DBSS, ThAlMBR proved to be compatible with diverse sludge line points, ensuring in both cases an important sludge minimization.

Can particulate matter be identified as the primary cause of the rapid spread of CoViD-19 in some areas of Northern Italy?

Northern Italy was the most affected by CoViD-19 compared to other Italian areas and comprises zones where air pollutants concentration was higher than in the rest of Italy. The aim of the research is to determine if particulate matter (PM) has been the primary cause of the high CoViD-19 spread rapidity in some areas of Northern Italy. Data of PM for all the 41 studied cities were collected from the local environmental protection agencies. To compare air quality data with epidemiological data, a statistical analysis was conducted identifying the correlation matrices of Pearson and Spearman, considering also the possible incubation period of the disease. Moreover, a model for the evaluation of the epidemic risk, already proposed in literature, was used to evaluate a possible influence of PM on CoViD-19 spread rapidity. The results exclude that PM alone was the primary cause of the high CoVid-19 spread rapidity in some areas of Northern Italy. Further developments are necessary for a better comprehension of the influence of atmospheric pollution parameters on the rapidity of spread of the virus SARS-CoV-2, since a synergistic action with other factors (such as meteorological, socio-economic and cultural factors) could not be excluded by the present study.

Analysis of lockdown for CoViD-19 impact on NO2 in London, Milan and Paris: What lesson can be learnt?

Nitrogen dioxide (NO2) can have harmful effects on human health and can act as a precursor for the formation of other air pollutants in urban environment such as secondary PM2.5 and ozone. The lockdown measures for CoViD-19 allowed to simulate on a large scale the massive and prolonged reduction of road traffic (the main source for NO2 in urban environment). This work aims to selectively assess the maximum impact that total traffic blocking measures can have on NO2. For this reason, three megacities (London, Milan and Paris) were chosen which had similar characteristics in terms of climatic conditions, population, policies of urban traffic management and lockdown measures. 52 air quality control units have been used to compare data measured in lockdown and in the same periods of previous years, highlighting a significant decrease in NO2 concentration due to traffic (London: 71.1 % - 80.8 %; Milan: 8.6 % - 42.4 %; Paris: 65.7 % - 79.8 %). In 2020 the contribution of traffic in London, Milan and Paris dropped to 3.3 ± 1.3 µg m-3, 6.1 ± 0.8 µg m-3, and 13.4 ± 1.5 µg m-3, respectively. Despite the significant reduction in the NO2 concentration, in UT stations average NO2 concentrations higher than 40 µg m-3 were registered for several days. In order to reduce the pollution, the limitation of road traffic could be not enough, but a vision also aimed at rethink the vehicles and their polluting effects should be developed.

Evaluation of foaming potential for water treatment: limits and developments.

The critical issue generated by foaming in wastewater treatment plants (WWTPs) is a problem that is currently very common and shared, but which to date is treated mainly only at the management level. In this work, an experimental study with foam tests on real and synthetic waters was conducted using a laboratory scale plant and foaming power indices were calculated. To date, the estimation of foaming potential is mainly based on these indices which give information only on height/volume of foams but not on the type of foams, in terms of consistency and therefore stability. Tests showed that foaming power indices were highly variable with the same water: it was not possible to identify a single foaming potential value for each water. Two models were proposed to estimate the percentage increase in height of chemical foams produced following the introduction of air below the surface of a liquid. In terms of determination coefficient, the results obtained from the complex model were better: R2 was 0.82 for the simple linear model and 0.90 for the complex one. This approach has allowed to underline some critical aspects of foaming potential as it is determined today and the possible improvements applicable for a more objective evaluation.

Sharing health data among general practitioners: The Nu.Sa. project.

Today, e-health has entered the everyday work flow in the form of a variety of healthcare providers. General practitioners (GPs) are the largest category in the public sanitary service, with about 60,000 GPs throughout Italy. Here, we present the Nu.Sa. project, operating in Italy, which has established one of the first GP healthcare information systems based on heterogeneous data sources. This system connects all providers and provides full access to clinical and health-related data. This goal is achieved through a novel technological infrastructure for data sharing based on interoperability specifications recognised at the national level for messages transmitted from GP providers to the central domain. All data standards are publicly available and subjected to continuous improvement. Currently, the system manages more than 5,000 GPs with about 5,500,000 patients in total, with 4,700,000 pharmacological e-prescriptions and 1,700,000 e-prescriptions for laboratory exams per month. Hence, the Nu.Sa. healthcare system that has the capacity to gather standardised data from 16 different form of GP software, connecting patients, GPs, healthcare organisations, and healthcare professionals across a large and heterogeneous territory through the implementation of data standards with a strong focus on cybersecurity. Results show that the application of this scenario at a national level, with novel metrics on the architecture's scalability and the software's usability, affect the sanitary system and on GPs' professional activities.

Cosmology and fundamental physics with the Euclid satellite.

Euclid is a European Space Agency medium-class mission selected for launch in 2020 within the cosmic vision 2015-2025 program. The main goal of Euclid is to understand the origin of the accelerated expansion of the universe. Euclid will explore the expansion history of the universe and the evolution of cosmic structures by measuring shapes and red-shifts of galaxies as well as the distribution of clusters of galaxies over a large fraction of the sky. Although the main driver for Euclid is the nature of dark energy, Euclid science covers a vast range of topics, from cosmology to galaxy evolution to planetary research. In this review we focus on cosmology and fundamental physics, with a strong emphasis on science beyond the current standard models. We discuss five broad topics: dark energy and modified gravity, dark matter, initial conditions, basic assumptions and questions of methodology in the data analysis. This review has been planned and carried out within Euclid's Theory Working Group and is meant to provide a guide to the scientific themes that will underlie the activity of the group during the preparation of the Euclid mission.

Non-invasive UWB sensing of astronauts' breathing activity.

The use of a UWB system for sensing breathing activity of astronauts must account for many critical issues specific to the space environment. The aim of this paper is twofold. The first concerns the definition of design constraints about the pulse amplitude and waveform to transmit, as well as the immunity requirements of the receiver. The second issue concerns the assessment of the procedures and the characteristics of the algorithms to use for signal processing to retrieve the breathing frequency and respiration waveform. The algorithm has to work correctly in the presence of surrounding electromagnetic noise due to other sources in the environment. The highly reflecting walls increase the difficulty of the problem and the hostile scenario has to be accurately characterized. Examples of signal processing techniques able to recover breathing frequency in significant and realistic situations are shown and discussed.

Cosmology and Fundamental Physics with the Euclid Satellite.

Euclid is a European Space Agency medium-class mission selected for launch in 2019 within the Cosmic Vision 2015-2025 program. The main goal of Euclid is to understand the origin of the accelerated expansion of the universe. Euclid will explore the expansion history of the universe and the evolution of cosmic structures by measuring shapes and red-shifts of galaxies as well as the distribution of clusters of galaxies over a large fraction of the sky. Although the main driver for Euclid is the nature of dark energy, Euclid science covers a vast range of topics, from cosmology to galaxy evolution to planetary research. In this review we focus on cosmology and fundamental physics, with a strong emphasis on science beyond the current standard models. We discuss five broad topics: dark energy and modified gravity, dark matter, initial conditions, basic assumptions and questions of methodology in the data analysis. This review has been planned and carried out within Euclid's Theory Working Group and is meant to provide a guide to the scientific themes that will underlie the activity of the group during the preparation of the Euclid mission.

Decomposition of hexamethylcyclotrisiloxane over solid oxides.

The decomposition of hexamethylcyclotrisiloxane (HMCTS) has been studied at room temperature and in the range 473-673 K over the surface of basic (CaO, MgO) and acidic oxides (Al(2)O(3), SiO(2)). Alumina allows the complete removal of HMCTS from synthetic biogases at 673 K. A reactive adsorption occurs with surface silication and release of methane. The adsorption capacity of our alumina adsorbent (180 m(2) g(-1)), until saturation, at 673 K, is 0.31 g((HMCTS))g((Al2O3))(-1), which corresponds to one silicon atom per 9 A(2), i.e. the silication monolayer capacity. On the contrary, silica, which is an excellent adsorbent for siloxanes at room temperature, looses its adsorption ability at high temperature as it is typical of a molecular adsorption behavior. Basic oxides such as MgO and CaO have strong reactivity in decomposing siloxanes in the absence of CO(2), but loose reactivity when in contact with carbon dioxide because of surface carbonation.